Glorex Crystal Epoxy Resin 2:1 for Casting & Sculpting

• Next-generation 2:1 Crystal Epoxy Resin, ideal for casting and sculpting with a crystal-clear finish.
• Shapeable during the partial curing stage, it allows active forming, bending and detailed modelling, opening up new possibilities for transparent 3D vases, organic shapes and sculptural compositions.
• Controlled low-heat curing helps protect delicate moulds and embedded objects, while its high fluidity allows it to fill even very fine mould details with minimal bubbles.
• Suitable for casting in silicone moulds, embedding metal or wooden elements, coating objects, filling and sealing cracks in wooden surfaces, and for jewellery, artworks, DIY and decorative applications.
• Easily tintable while still in liquid form with resin colourants to create transparent, translucent or opaque effects, and decorative inclusions such as metal leaf flakes, dried flowers and small decorative elements can also be embedded.
• Technical information: mixing ratio 2:1 resin to hardener (for example 200g resin + 100g hardener = 300g mixture), with exact measuring required for proper curing.
• Application instructions: never pour thicker than 2cm per layer. Once the first layer has hardened, the next layer can be poured on top.
• Working and curing times: approx. 30 minutes working time, approx. 15 hours curing time, can then be demoulded, and is ready for modelling in 4 hours depending on layer thickness and room temperature.
• Mixing instructions: stir thoroughly for approx. 5 minutes and then leave the mixture to stand for approx. 10 minutes so that trapped air bubbles can escape.
• Colour dosage: add approx. 1-4 drops of colour per 25ml of resin. Adding too much colour may impair curing.
• Storage and processing temperature: 15°C to 25°C. Keep frost-free.

No files available