.svg){kind=small}
.svg){kind=small}
.svg){kind=small}
.svg){kind=small}
Pebeo Lino Ink, Νο503 Carmine Red - 80ml
+21 PACΟins / piece
High-quality water-based lino printing inks for printing from linoleum, wood and other relief printing materials. Their smooth, creamy consistency rolls out effortlessly with a brayer, producing sharp details, crisp outlines and even colour coverage.Rich, high-coverage colours formulated with highly concentrated, stable pigments for vibrant, clean + Read More
- High-quality water-based lino printing inks for printing from linoleum, wood and other relief printing materials. Their smooth, creamy consistency rolls out effortlessly with a brayer, producing sharp details, crisp outlines and even colour coverage.
- Rich, high-coverage colours formulated with highly concentrated, stable pigments for vibrant, clean prints, even on dark papers. Available in 24 colours, including metallic, fluorescent and Duochrome shades that change appearance depending on the viewing angle and lighting.
- All colours are fully intermixable, allowing you to create an unlimited range of custom shades. Approximately 15 minutes of working time and an estimated 30-minute drying time on paper. They can also be used with Pebeo LINO auxiliaries to extend the working time or create lighter shades without reducing opacity.
- Easy cleanup with warm water and soap, with no need for solvents. Highly economical, as 1ml of ink is sufficient to cover approximately one A5 printing plate (14.8x21cm), depending on the printing technique and the amount of ink applied.
- 80ml tube made from 70% post-consumer recycled (PCR) plastic, with clear labelling of the lightfastness, opacity and pigment composition of each colour. Suitable for both beginners and experienced printmakers.
- Important: Protect from freezing, as freezing permanently damages the ink.
-
No.503
-
ManufacturerPebeo
-
Color NameCarmine Red
-
Product TypeEtching Inks And Grounds
-
Barcode3167861415033
-
Color FamilyRed
-
Paco code7610534
-
SKUPEBEOC-141503
-
Size80ml
-
DescriptionLino Ink
Πληροφορίες Χρωστικής
-
Pigment NamePW6-Titanium White
-
Pigment typeinorganic
-
Chemical Nametitanium dioxide
-
Chemical FormulaTiO2
-
Properties
Titanium White is the most brilliant of the white pigments. It is considered an all purpose oil color useful in all techniques and the best all around white. Its masstone is neither warm nor cool, placing it somewhere between Lead White and Zinc White. It is less prone to cracking and yellowing than Lead White, but it still yellows easily. Titanium White dries slowly in oil form, more slowly than Lead White but more quickly than Zinc White. It is opaque in oil and acrylic forms and semi-opaque in watercolor form. This pigment has good chemical stability, and its tinting strength is superior to both Lead White and Zinc White.
-
Permanence
Titanium White has excellent permanence and lightfastness.
-
Toxicity
Titanium dioxide is highly stable and is regarded as completely non-toxic. Animal studies do not indicate that it is absorbed biologically, even after long periods of exposure. The primary safety concern is with inhalation of fine pigment dust particles. If inhaled in large amounts over several years, Titanium White may cause benign pneumoconiosis visible on x-rays. The National Institute of Occupational Safety and Health (NIOSH) considers fine titanium dioxide particles, if inhaled, to be a human carcinogen. The primary concern for artists is to avoid exposure to fine particulate dust from raw pigments.
-
History
Titanium is the ninth most abundant element in the Earth's crust, however mineral deposits that are economical to mine are less common. Titanium dioxide was first discovered in 1821, although it could not be mass produced until 1919. Widespread use of the pigment began in the 1940s. Since that time, it has become the most commonly used white pigment. The name comes from the Latin word Titan, the name for the elder brother of Kronos and ancestor of the Titans, and from the Greek word tito, meaning day or sun.
-
Pigment NamePR170-Naphthol Red
-
Pigment typeorganic, naphthol AS
-
Chemical Name-
-
Chemical FormulaC26H22N4O4
-
Properties
Pigment PR170 is a bright deep red with bluish undertones. It has an average drying time. It has two crystaline forms that differ significantly in opacity. The more transparent form (F5RK) tends to be more bluish and is less lightfast.
-
Permanence
The lightfastness and weatherfastness of Pigment PR170 varies, depending on the application and the crystaline form. The opaque form (F3RK) has very good lightfastness, and is more weather resistant. The transparent form (F5RK) has lightfastness that is considered acceptable in pure applications, but it fades more in tints. Neither form is considered suitable for exterior use.
-
Toxicity
-
-
History
Naphthol pigments are actually dyes that are laked to form pigments. First developed by the German chemical company Hoechst A.G. before World War I, their use in artist paints began in the 1920s. Pigment Red PR170 is a Naphthol AS pigment, chemically related to the diarylide yellow pigments. The Naphthol AS pigments comprise a range of reds. They are used in plastics, textiles, and printing inks.
No files available
Customer Reviews
No reviews yet